If you’re looking for a reliable, durable and portable power station for your camping or road trips, the Goal Zero YETI 1000 Core might be a great option for you. It has a 983 watt-hour capacity, a 1200 watt inverter, and seven output ports to power a variety of devices. It can also be recharged with a wall outlet or optional solar panels. But what if you encounter some problems with your YETI 1000 Core? How do you troubleshoot them and get back to enjoying your outdoor adventures? In this guide, we’ll cover some common issues and solutions for the Goal Zero YETI 1000 Core portable power station.
Problem: The YETI 1000 Core is not charging or charging slowly
There are several possible reasons why your YETI 1000 Core is not charging or charging slowly. Here are some steps to troubleshoot this issue:
- Check the input port and cable. Make sure you are using the correct input port (the 8mm port on the back of the unit) and the included 120W power supply or a compatible solar panel. Also, check the cable for any damage or loose connections.
- Check the input voltage and current. The YETI 1000 Core can accept an input voltage range of 14-22V and a maximum input current of 10A. If the input voltage or current is too low or too high, the unit may not charge properly or at all. You can use a multimeter to measure the input voltage and current from your power source.
- Check the battery level and temperature. The YETI 1000 Core has a built-in battery management system that protects the battery from overcharging, over-discharging, and overheating. If the battery level is too low (below 10%) or too high (above 80%), the charging speed may slow down to extend the battery life. If the battery temperature is too high (above 45°C) or too low (below 0°C), the charging may stop to prevent damage to the battery. You can check the battery level and temperature on the LCD display on the front of the unit.
- Reset the unit. If none of the above steps work, you can try resetting the unit by pressing and holding the power button for about 10 seconds until the LCD display turns off and then on again. This may clear any errors or glitches that prevent the unit from charging normally.
Problem: The YETI 1000 Core is not powering devices or powering them intermittently
There are several possible reasons why your YETI 1000 Core is not powering devices or powering them intermittently. Here are some steps to troubleshoot this issue:
- Check the output port and cable. Make sure you are using the correct output port for your device (the AC ports, the USB ports, or the 12V port) and a compatible cable. Also, check the cable for any damage or loose connections.
- Check the output wattage and surge wattage. The YETI 1000 Core has a maximum output wattage of 1200W and a maximum surge wattage of 2400W. If your device draws more than these limits, the unit may not power it or may shut off to protect itself from overload. You can check the output wattage on the LCD display on the front of the unit.
- Check the device compatibility. Some devices may not be compatible with the YETI 1000 Core due to their specific power requirements or characteristics. For example, some devices may have a high starting wattage that exceeds the surge wattage of the unit, such as air conditioners, compressors, or pumps. Some devices may have a sensitive electronics that require a pure sine wave AC output, such as medical equipment, audio equipment, or laser printers. The YETI 1000 Core has a modified sine wave AC output, which may not work well with these devices.
- Reset the unit. If none of the above steps work, you can try resetting the unit by pressing and holding the power button for about 10 seconds until the LCD display turns off and then on again. This may clear any errors or glitches that prevent the unit from powering devices normally.
Problem: The YETI 1000 Core is showing an error code on the LCD display
The YETI 1000 Core has a self-diagnostic system that displays error codes on the LCD display if there is something wrong with the unit. Here are some common error codes and their meanings:
- E01: Input overvoltage. This means that the input voltage from your power source is too high for the unit to handle. You should disconnect the power source and use a different one that meets the input voltage range of 14-22V.
- E02: Input overcurrent. This means that the input current from your power source is too high for the unit to handle. You should disconnect the power source and use a different one that meets the maximum input current of 10A.
- E03: Output overload. This means that the output wattage from your device is too high for the unit to handle. You should disconnect the device and use a different one that meets the maximum output wattage of 1200W and the maximum surge wattage of 2400W.
- E04: Output short circuit. This means that there is a short circuit in your device or cable that is causing a high current to flow through the unit. You should disconnect the device and cable and check them for any damage or loose connections.
- E05: Battery overvoltage. This means that the battery voltage is too high for the unit to handle. This may happen if you charge the unit with an incompatible power source or if there is a problem with the battery management system. You should stop charging the unit and contact Goal Zero customer support for assistance.
- E06: Battery undervoltage. This means that the battery voltage is too low for the unit to operate. This may happen if you discharge the unit too much or if there is a problem with the battery management system. You should recharge the unit as soon as possible and contact Goal Zero customer support for assistance.
- E07: Battery overtemperature. This means that the battery temperature is too high for the unit to operate. This may happen if you expose the unit to direct sunlight, high ambient temperature, or high charging or discharging current. You should move the unit to a cooler place and let it cool down before using it again.
- E08: Battery undertemperature. This means that the battery temperature is too low for the unit to operate. This may happen if you expose the unit to freezing temperature or low charging or discharging current. You should move the unit to a warmer place and let it warm up before using it again.
If you see any other error codes or if the error codes persist after following the troubleshooting steps, you should contact Goal Zero customer support for assistance.
We hope this guide helps you solve any problems you may have with your Goal Zero YETI 1000 Core portable power station. If you need more help, you can visit Goal Zero’s website for more information, FAQs, manuals, and videos. You can also call their customer support at 1-888-794-6250 or email them at support@goalzero.com.
Happy camping!
