Uh oh, is your Goal Zero Escape 150 power station down for the count? Don’t panic if your portable power pack isn’t charging up like it should. With the right troubleshooting, you can get your Escape 150 back up and running.
This post dives into solutions for a Goal Zero Escape 150 that’s on the fritz. We’ll investigate the potential causes behind your power station’s charging failure. You’ll also get step-by-step instructions for getting your Escape 150 to power up again.
With this guide, you’ll be equipped to pinpoint and resolve any issues keeping your Escape 150 from charging. We’ll help you revive your portable power station so it’s ready for your next adventure. Don’t let a glitch sideline your Goal Zero – learn how to fix it fast!
The main reason why the Goal Zero Escape 150 does not charge is because the battery is dead or damaged, or the input port is faulty or incompatible. To fix this problem, you need to replace the battery, check the input port, and use a compatible power source.
How to replace the battery of the Goal Zero Escape 150
The Goal Zero Escape 150 is a portable power station that can provide 150Wh of power for your devices and appliances. It has a built-in lead-acid battery that can be recharged from solar panels, wall outlets, or car adapters. However, like any battery, it has a limited lifespan and can lose its capacity over time. If your Escape 150 does not charge at all, or only holds a small amount of charge, it may be time to replace the battery.
The replacement battery for the Escape 150 is a 12V 14Ah lead-acid battery, also known as an AGM battery. You can find them at stores like Autozone or Oreillys, or order them online from Goal Zero1. To replace the battery, you will need a Phillips screwdriver and a pair of pliers. Follow these steps:
- Turn off the Escape 150 and disconnect it from any power source.
- Remove the four screws on the bottom of the unit and lift off the bottom cover.
- Disconnect the two wires from the old battery and remove it from the unit.
- Insert the new battery in the same position and connect the wires to the terminals. Make sure the red wire goes to the positive (+) terminal and the black wire goes to the negative (-) terminal.
- Replace the bottom cover and secure it with the four screws.
- Charge the new battery fully before using it.
You can watch this video2 for a visual guide on how to replace the battery.
How to check the input port of the Goal Zero Escape 150
The input port of the Goal Zero Escape 150 is where you plug in your power source to charge the unit. It is a 4.7mm port that accepts 14-22V input at 3A max (45W). If your Escape 150 does not charge properly, or shows an error message on the LED display, it may be because the input port is faulty or incompatible with your power source. To check the input port, follow these steps:
- Inspect the input port for any physical damage, such as cracks, bends, or corrosion. If you see any signs of damage, contact Goal Zero customer service for a repair or replacement.
- Make sure you are using a compatible power source for your Escape 150. The recommended sources are:
- AC wall charger (included with your Escape 150)
- 12V car adapter (included with your Escape 150)
- Goal Zero Nomad 13.5 or Nomad 27 solar panel
- Goal Zero Boulder 15 or Boulder 30 solar panel
- USB power source (such as a laptop or a portable power station)
- Make sure you are using a compatible cable for your power source. The cable should have a 4.7mm plug on one end and a plug that matches your power source on the other end. Do not use any adapters or converters that may alter the voltage or current of your power source.
- Plug in your power source to the input port and turn on your Escape 150. The LED indicator light next to the input port should turn red when charging, and green when fully charged. If it does not light up at all, or flashes red and green alternately, it means there is an error with your power source or input port.
How to prevent your Goal Zero Escape 150 from not charging
To prevent your Goal Zero Escape 150 from not charging in the future, you should follow some best practices for maintaining and using your unit. Here are some tips:
- Keep your Escape 150 in a cool and dry place when not in use. Avoid exposing it to extreme temperatures, humidity, or direct sunlight.
- Charge your Escape 150 regularly to keep the battery healthy. Do not let it sit idle for more than three months without charging it.
- Do not overcharge or undercharge your Escape 150. Unplug it from any power source when it is fully charged, and do not let it drain completely before recharging it.
- Do not overload or short-circuit your Escape 150. Do not exceed its output capacity of 80W (10A) per port, and do not connect any devices that may cause sparks or flames.
- Do not open or modify your Escape 150. Doing so may void your warranty and cause damage to the unit or injury to yourself.
FAQs
Here are some frequently asked questions about the Goal Zero Escape 150:
Q: How long does it take to charge the Goal Zero Escape 150?
A: The charging time of the Escape 150 depends on the power source and the battery level. According to the user manual, these are the approximate charging times for different sources:
- AC wall charger: 5 hours
- 12V car adapter: 5-6 hours
- Goal Zero Nomad 13.5 solar panel: 5 hours
- Goal Zero Nomad 27 solar panel: 10 hours
- Goal Zero Boulder 15 solar panel: 12 hours
- Goal Zero Boulder 30 solar panel: 6 hours
- USB power source: 15-16 hours
Q: How do I know how much charge is left in my Goal Zero Escape 150?
A: The LED display on the front of the Escape 150 shows how much charge is left in the battery. The display has four bars, each representing 25% of the battery capacity. If all four bars are shaded, it means the battery is full. If only one bar is shaded, it means the battery is low and needs to be recharged.
Q: Can I use my Goal Zero Escape 150 while it is charging?
A: Yes, you can use your Escape 150 while it is charging from any power source. However, this will slow down the charging process and reduce the runtime of the unit.
Conclusion
The Goal Zero Escape 150 is a versatile and reliable portable power station that can charge your devices and appliances from various sources. However, if you encounter the problem of the unit not charging, do not panic. It is most likely because the battery is dead or damaged, or the input port is faulty or incompatible. To fix this problem, you need to replace the battery, check the input port, and use a compatible power source.
We hope this post has helped you solve your problem with the Goal Zero Escape 150. If you have any questions or comments, please feel free to leave them below. And if you are looking for more information and guidance on portable power stations and alternative energy solutions, be sure to check out our other posts on PortablePowerLife.com. Thanks for reading!
