Uh oh. Reaching for your trusty Goal Zero Venture 70 power bank only to find it low or not charging at all. Without your rugged sidekick, devices dying faster than a western sunset. But before abandoning your portable power station, try these tips to troubleshoot and fix common Venture 70 issues.
From chargers not connecting properly to loose ports, a few simple steps can get your Venture 70 juiced up again. We’ll cover quick cleaning fixes for finicky charging cords and ports. Dive into light codes to decode the real charging issue. Show you how to reset, update firmware, and maximize charging efficiency so slow power ups are a thing of the past.
With the right troubleshooting, your Venture 70 can keep devices powered on the trails for years to come. Don’t lose hope or buy a replacement too quickly! Often a quick fix is all that’s needed to restore your rugged power bank to its former charging glory. Follow along as we shed light on simple solutions to revive your Goal Zero Venture 70. You’ll be back to charging phones, tablets, and cameras in no time.
The most common reason why your Venture 70 is not charging is because the battery level is too low. To fix this, you need to charge your Venture 70 using an included cable or a compatible solar panel. You can also try a soft reset or a factory reset of your Venture 70 to restore its normal function.
How to Charge Your Venture 70
The first thing you need to do when your Venture 70 is not charging is to check the battery level. To do this, press the battery button on the top of the power bank. The blue indicator lights will show you how much battery is left. When the Venture 70’s battery is dead, the first blue indicator light will flash when you press the battery button.
To charge your Venture 70, you need to use an included cable or a compatible solar panel. The Venture 70 has two input ports: a micro-USB port and a USB-C port. You can use either one to charge your power bank, but the USB-C port will charge faster. Here are the steps to charge your Venture 70:
- Plug one end of the cable into the input port of your Venture 70, and plug the other end into a USB power source, such as a wall charger, a car charger, or a laptop.
- Alternatively, you can plug one end of the cable into the input port of your Venture 70, and plug the other end into a compatible solar panel, such as the Nomad 50 or the Nomad 100.
- The blue indicator lights will flash while your Venture 70 is charging. When all four lights are solid, your Venture 70 is fully charged.
The charging time of your Venture 70 depends on the power source and the cable you use. For example, using a wall charger with a USB-C cable will charge your Venture 70 in about five hours, while using a solar panel with a micro-USB cable will charge your Venture 70 in about eight hours.
How to Reset Your Venture 70
If charging your Venture 70 doesn’t solve the problem, you can try resetting your power bank. There are two types of resets: a soft reset and a factory reset.
A soft reset is a simple way to restart your Venture 70 without losing any data or settings. It can help fix minor issues such as slow charging or unresponsive buttons. Here are the steps to do a soft reset:
- Press and hold the battery button and the flashlight button at the same time for about three seconds.
- Release both buttons and wait for about five seconds.
- Press the battery button again to check if your Venture 70 is working normally.
A factory reset is a more drastic way to restore your Venture 70 to its original state. It can help fix major issues such as corrupted firmware or faulty circuitry. However, it will also erase all your data and settings, so you should only do it as a last resort. Here are the steps to do a factory reset:
- Press and hold the battery button and the flashlight button at the same time for about ten seconds.
- Release both buttons and wait for about five seconds.
- Your Venture 70 will enter storage mode, which means it will discharge its battery until it reaches zero percent.
- Plug your Venture 70 into a power source to recharge it and exit storage mode.
- Press the battery button again to check if your Venture 70 is working normally.
How to Get the Most Out of Your Venture 70
To prevent any future issues with your Venture 70, here are some tips on how to get the most out of your power bank:
- Keep your Venture 70 away from extreme temperatures, moisture, dust, and direct sunlight.
- Use only included cables or compatible solar panels to charge your Venture 70.
- Use only devices that match the output ports of your Venture 70 to charge them.
- Use the smart charging feature to optimize the output for each device by pressing the battery button after plugging them in.
- Use the flashlight feature to illuminate your surroundings or signal for help by pressing the flashlight button to switch between high, low, and strobe modes.
- Use the pass-through charging feature to charge your devices and your Venture 70 at the same time by plugging them into the output ports while your Venture 70 is plugged into a power source.
FAQs
- How long does the battery of the Venture 70 last?
The battery of the Venture 70 has a capacity of 19,200 mAh or 71 Wh. It can charge a smartphone up to seven times, a tablet up to two times, or a camera up to ten times. The battery life of your Venture 70 depends on how often and how much you use it.
- How can I tell if my Venture 70 is charging or not?
You can tell if your Venture 70 is charging or not by looking at the blue indicator lights. When your Venture 70 is charging, the lights will flash. When your Venture 70 is fully charged, the lights will be solid. When your Venture 70 is not charging, the lights will be off.
- What should I do if my Venture 70 gets wet or damaged?
If your Venture 70 gets wet or damaged, you should stop using it and contact Goal Zero customer service for assistance. You can call them at 1-888-794-6250 or email them at support@goalzero.com.
Conclusion
The Goal Zero Venture 70 is a rugged and waterproof power bank that can charge your devices while being charged itself. It has a smart charging feature, a flashlight feature, and a pass-through charging feature. However, sometimes it might not charge properly due to low battery level or other issues. To fix this, you need to charge your Venture 70 using an included cable or a compatible solar panel. You can also try a soft reset or a factory reset of your Venture 70 to restore its normal function. If you follow these steps and tips, you can solve your Venture 70 not charging problem and enjoy your power bank for a long time.
