Will Goal Zero Portable Power Stations Run A Heater?

Winter is coming – are you ready to stay cozy and warm if the power goes out? If you have a Goal Zero portable power station, you may be wondering if it has enough juice to run a space heater and keep you toasty.

This post breaks down everything you need to know about powering heaters with Goal Zero stations. We’ll calculate exactly how long your Yeti or Explorer can run different heater types. You’ll learn insider tips for getting the most heating time from each charge. And we’ll recommend the most compatible and efficient heaters to pair with Goal Zero’s lithium power packs.

With this intel, you’ll know how to stay warm and powered-up using your Goal Zero station this winter. We’ll equip you with the knowledge to beat any chills if the grid goes down. So plug into this guide and learn how to run heaters with Goal Zero!

Goal Zero portable power stations can run a heater, but the run time and performance depend on the power rating of the heater and the battery capacity of the power station.

Wattage of the heater

The wattage of the heater is the amount of power that it draws from the power source. The higher the wattage, the more electricity it uses. You can find the wattage of your heater on its label or manual, or you can use a watt meter to measure it.

The wattage of the heater determines how much load it puts on the power station. If the load is higher than the rated output of the power station, it will not be able to run the heater. For example, if you have a 1500 watt heater and a Goal Zero Yeti 200X power station that has a rated output of 120 watts, you will not be able to run the heater with it.

However, if the load is lower than or equal to the rated output of the power station, it will be able to run the heater. For example, if you have a 500 watt heater and a Goal Zero Yeti 500X power station that has a rated output of 300 watts, you will be able to run the heater with it.

Watt-hours of the power station

The watt-hours of the power station is the amount of energy that it can store in its battery. The higher the watt-hours, the more energy it has. You can find the watt-hours of your power station on its label or manual, or you can calculate it by multiplying its voltage by its amp-hours.

The watt-hours of the power station determines how long it can run the heater. If you divide the watt-hours by the wattage of the heater, you will get an estimate of how many hours it can run before running out of juice. For example, if you have a 500 watt heater and a Goal Zero Yeti 500X power station that has 505 watt-hours, you can estimate that it can run for about one hour (505 / 500 = 1.01).

However, this estimate is not very accurate because it does not account for other factors such as battery efficiency, temperature, and device settings. Therefore, you should always expect less run time than what you calculate.

How to choose a Goal Zero portable power station for your heater

If you want to choose a Goal Zero portable power station for your heater, you need to consider both its rated output and its battery capacity. You need to make sure that both are sufficient for your heating needs.

Here are some tips to help you choose:

• Choose a low-wattage heater that is suitable for your space and climate. A low-wattage heater will consume less electricity and extend your run time.
• Choose a high-watt-hour power station that has enough energy to run your heater for as long as you need. A high-watt-hour power station will give you more flexibility and peace of mind.
• Choose a compatible plug or adapter for your heater and your power station. Some heaters may have different plugs or voltages than your power station, so you need to check if they are compatible or if you need an adapter.
• Choose a solar panel or generator to recharge your power station if you plan to use it for extended periods. A solar panel or generator will allow you to replenish your battery while using your heater, so you don’t have to worry about running out of power.

FAQs

Q: What is the best Goal Zero portable power station for running a heater?

A: There is no definitive answer to this question because different heaters and different situations may require different power stations. However, some general guidelines are:

• If you have a small space and a mild climate, you may be able to use a small and lightweight power station like the Goal Zero Yeti 200X or 500X with a low-wattage heater like a ceramic or infrared heater.
• If you have a large space and a cold climate, you may need a large and powerful power station like the Goal Zero Yeti 1500X or 3000X with a high-wattage heater like an oil-filled radiator or convection heater.
• If you have an RV or camper van, you may want to use an integrated system like the Goal Zero Yeti Lithium Link Module with Tank Expansion Battery that can connect to your vehicle’s alternator and provide continuous power for your heater and other appliances.

Q: How can I save energy when running a heater with a Goal Zero portable power station?

A: There are some ways to save energy when running a heater with a Goal Zero portable power station, such as:

• Use the lowest setting that is comfortable for you. A lower setting will use less electricity and extend your run time.
• Turn off the heater when you don’t need it. A heater that is constantly running will drain your battery faster than a heater that is turned on and off as needed.
• Insulate your space and reduce drafts. Insulation and draft-proofing will help retain the heat and reduce the need for heating.
• Use other sources of heat if available. For example, you can use a fireplace, a stove, or a hot water bottle to supplement your heater and reduce its load.

Q: Can I run a heater and other devices at the same time with a Goal Zero portable power station?

A: Yes, you can run a heater and other devices at the same time with a Goal Zero portable power station, as long as the total load does not exceed the rated output of the power station. For example, if you have a Goal Zero Yeti 500X power station that has a rated output of 300 watts, you can run a 200 watt heater and a 100 watt laptop at the same time, but not a 200 watt heater and a 150 watt TV.

However, you should be aware that running multiple devices at the same time will consume more electricity and reduce your run time. Therefore, you should prioritize your needs and use only what is necessary.

Conclusion

Running a heater with a Goal Zero portable power station is possible, but it requires careful planning and preparation. You need to choose a suitable heater and power station for your needs, and use them wisely to save energy and extend your run time.

We hope this post has answered your question and helped you understand how to run a heater with a Goal Zero portable power station. If you have any comments or questions, please feel free to leave them below. And if you are looking for more information and guidance on portable power stations and alternative energy solutions, don’t forget to check out PortablePowerLife.com for more helpful articles. Thanks for reading!