The Goal Zero Yeti 1500X is a beast of a power station, pumping out a monstrous 1516Wh of portable power. But every beast needs to sleep. So how do you get this high-capacity Yeti to power down when not in use?
Unlike your average electronics, the Yeti 1500X lacks an overall power button. But don’t take this as a sign to panic! The Yeti has individual power buttons for each output port.
To start the shutdown process, press the power buttons on all active ports. The Yeti will enter standby mode, reducing battery drain. For a full power down, press and hold the circular battery icon button. The screen will count down from three – then the Yeti will enter deep sleep.
With great power comes great button pressing responsibility. But following this simple routine, you can easily tame the beast and wake it when you need your electronic friend again. Through thoughtful design, Goal Zero enables safe, complete shutdown and maximizes your battery life.
So slumber peacef
How to turn off the output ports
The Goal Zero Yeti 1500X has various output ports for different types of devices and appliances. These include:
- Two AC outlets that can output pure sine wave AC power with 230V and 50Hz
- Two USB-A ports that can output 5V and up to 2.4A each
- One USB-C port that can output 5-12V and up to 3A
- One USB-C PD port that can input or output 5-20V and up to 3A
- One 12V car port that can output 12V and up to 13A
- One HPP (High Power Port) that can output 12V and up to 30A
- One expansion module port that can connect to additional batteries or accessories
Each output port has its own power button that you need to press to turn on or off. The power buttons are located next to the corresponding ports on the front panel of the unit. They are also labeled with icons and colors for easy identification.
To turn off an output port, simply press the power button until the LED indicator turns off. You can also press and hold the power button for three seconds to turn off all the output ports at once.
How to enter standby mode
The Goal Zero Yeti 1500X also has a standby mode that reduces the power consumption when no output ports are in use. The standby mode is indicated by a blue LED ring around the LCD screen on the front panel of the unit.
To enter standby mode, you need to turn off all the output ports by pressing their power buttons until the LED indicators turn off. You can also press and hold any power button for three seconds to turn off all the output ports at once.
The unit will then enter standby mode automatically after five minutes of inactivity. The LCD screen will dim and show only the battery level and status icons. The blue LED ring will also light up.
To exit standby mode, you need to press any power button to turn on an output port. The LCD screen will brighten and show more information. The blue LED ring will also turn off.
How to store the unit
If you want to store the Goal Zero Yeti 1500X for a long period of time, you need to follow some steps to ensure its safety and performance.
First, you need to charge the unit fully before storing it. You can charge it from a wall outlet, a car port or a solar panel. You can check the battery level and status on the LCD screen or on the Yeti App.
Second, you need to turn off all the output ports by pressing their power buttons until the LED indicators turn off. You can also press and hold any power button for three seconds to turn off all the output ports at once.
Third, you need to disconnect any input sources from the unit, such as wall chargers, car chargers or solar panels. You also need to disconnect any devices or appliances from the unit.
Fourth, you need to store the unit in a cool and dry place, away from direct sunlight and heat sources. You also need to protect it from dust, moisture and physical damage.
Fifth, you need to recharge the unit every three months to prevent battery degradation. You can also check the battery level and status on the LCD screen or on the Yeti App.
FAQs
Q: What happens if I forget to turn off an output port?
A: If you forget to turn off an output port, it will continue to draw power from the battery until it is depleted or until you turn it off manually. This will reduce your run time and battery life.
Q: What happens if I leave an input source connected to the unit?
A: If you leave an input source connected to the unit, it will continue to charge the battery until it is full or until you disconnect it manually. This will not harm the battery, but it may cause some power loss or inefficiency.
Q: How do I reset the unit if it malfunctions or freezes?
A: If the unit malfunctions or freezes, you can try to reset it by pressing and holding the WiFi button under the lid for 10 seconds. This will perform a soft reset that does not erase any data or settings. If the problem persists, you can contact Goal Zero customer service for assistance.
Conclusion
The Goal Zero Yeti 1500X is a powerful and versatile portable power station that can provide up to 1516Wh of battery capacity and 2000W of AC output for your devices and appliances. It can be recharged from various sources, such as wall outlets, car ports or solar panels. It can also be controlled and monitored from your smartphone via the Yeti App.
To turn off the Goal Zero Yeti 1500X, you need to press the power buttons for each output port that you want to turn off. You can also press and hold any power button for three seconds to turn off all the output ports at once. The unit will then enter standby mode after five minutes of inactivity, which reduces the power consumption.
To store the unit, you need to charge it fully, turn off all the output ports, disconnect any input sources and devices, and store it in a cool and dry place. You also need to recharge it every three months to prevent battery degradation.
